RouterOS 6.45.9 [long-term]がリリースされました。




Changes since 6.45.8:

*) arm - improved watchdog and kernel panic reporting in log after reboots on RB3011 and IPQ4018/IPQ4019 devices ("/system routerboard upgrade" required);
*) capsman - fixed "certificate" parameter updating on CAP;
*) certificate - fixed certificate verification when flushing CRL's;
*) chr - added support for file system quiescing;
*) chr - enabled support for VMBus protocol version 4.1;
*) chr - improved system stability when running CHR on Hyper-V;
*) console - prevent incorrect type interfaces appearing in command hints;
*) crs3xx - fixed frame forwarding after disabling/enabling bridge hardware offloading for CRS354-48G-4S+2Q+ device;
*) crs3xx - fixed interface statistics for CRS354-48G-4S+2Q+ and CRS354-48P-4S+2Q+ devices;
*) crs3xx - fixed switch rule "dst-port" parameter for IPv6 traffic on CRS305-1G-4S+, CRS326-24G-2S+, CRS328-24P-4S+, CRS328-4C-20S-4S+, netPower 15FR devices;
*) crs3xx - improved SFP+ DAC cable initialization for CRS326-24S+2Q+ device;
*) defconf - added welcome note with common first steps for new users;
*) discovery - do not send CDP and LLDP packets on interfaces that does not have MAC address;
*) health - fixed maximum SFP temperature reading under '/system health' menu;
*) hotspot - fixed redirect to log in page (introduced in v6.45);
*) ike1 - rekey phase 1 rekeying as responder for Windows initiators;
*) ipsec - improved system stability when handling fragmented packets;
*) led - added "dark-mode" functionality for CRS105-5S-FB;
*) lte - added "phy-cellid" value support for LTE-US;
*) lte - fixed IP type selection from APN on RBSXTLTE3-7;
*) lte - improved system stability when performing firmware update on R11e-LTE6;
*) sniffer - fixed minor typo in "host" menu;
*) snmp - fixed "ifSpeed" reporting for tunnel interfaces;
*) snmp - fixed "routeros-version" value returning from registration table;
*) snmp - fixed UPS battery voltage value scaling;
*) ssh - added support for RSA keys with SHA256 hash (RFC8332);
*) system - correctly handle Generic Receive Offloading (GRO) for MPLS traffic;
*) system - improved system stability when forwarding traffic from switch chip to CPU (introduced in v6.43);
*) system - improved system stability when receiving/sending TCP traffic on multicore devices;
*) traceroute - improved stability when invalid packet is received;
*) webfig - added default configuration confirmation window to WebFig;
*) webfig - allow skin designing without "ftp" and "sensitive" policies;
*) webfig - do not show WebFig menu when opening 'Check For Updates' in Quick Set;
*) winbox - added "Options" parameter support for DHCPv6 client and server;
*) winbox - added 160Mhz extension channel support for CAPsMAN;
*) winbox - added support for "Tools->WoL" menu;
*) winbox - do not show "Revision" parameter under "System/RouterBOARD" menu on devices that have only one revision;
*) winbox - fixed "ARP" parameter inheritance from "CAPs Configuration" configuration;
*) winbox - fixed "Bands" parameter display for LTE interfaces;
*) winbox - fixed "DSCP" parameter value setting;
*) winbox - fixed "Frequency" and "Secondary Frequency" parameter inheritance from "CAPs Channel" configuration;
*) winbox - fixed "Passthr. MAC Address" parameter display "LTE APNs" menu;
*) winbox - fixed "Switch" menu on CRS354-48P-4S+2Q+;
*) winbox - fixed "dst-port" unsetting in "IP->Hotspot->Walled Garden" menu;
*) winbox - fixed "invalid" flag presence under "System/Certificates/CRL" menu;
*) winbox - fixed automatic "IPv6->Firewall->Address List" table update;
*) winbox - increased limit of multi-entry fields to 100;
*) winbox - made "none" the default value for "Security Profile" parameter when creating a new "Wirelees->Connect list" entry;
*) winbox - renamed "Memory used" to "HDD used" for HDD type under "Tools->Graphing->Resource Graphs";
*) winbox - renamed "Routerboard" to "RouterBOARD" under "System/RouterBOARD" menu;
*) winbox - show "System/RouterBOARD/Mode Button" on devices that have such feature;
*) wireless - added "skip-dfs-channels" parameter;
*) wireless - allow using FCC "U-NII-2" frequency range for hAP ac2 and RBwAPGR series devices;
*) wireless - fixed default "antenna-gain" setting on SXT 2 devices;
*) wireless - improved 5GHz interface stability on RB4011iGS+5HacQ2HnD and Audience;
*) wireless - improved compatibility for "ETSI" wireless country profile;
*) wireless - improved system stability on hAP ac^2;
*) wireless - updated "bangladesh" regulatory domain information;
*) wireless - updated "indonesia4" regulatory domain information;
*) wireless - updated "south africa" regulatory domain information;



性能関連ではARM CPU搭載機種、CRS3xxシリーズ、などを中心にパフォーマンス関連の修正が入っているので、気になる方は適用してみても良いかもしれません。



Windows 用のbandwidth(帯域幅)テストバージョンの更新版を公開しました。


Updated btest.exe available for download - MikroTik


MikroTik is a Latvian company which was founded in 1996 to develop routers and wireless ISP systems. MikroTik now provides hardware and software for Internet co...


v6.45.9 [long-term] is released! - MikroTik