RouterOS 6.42.5 [current] が公開になりました。

2018.06.28

この記事は約4分で読めます。

RouterOSのcurrentブランチが、思ったよりも日を開けずにバージョンアップされています。

更新内容は以下の通り。内容は少なめで、かつW60G向けの修正が多く入っています。

RouterOS version 6.42.5 has been released in public "current" channel!

Before an upgrade:
1) Remember to make backup/export files before an upgrade and save them on another storage device;
2) Make sure the device will not lose power during upgrade process;
3) Device has enough free storage space for all RouterOS packages to be downloaded.

What's new in 6.42.5 (2018-Jun-26 12:12):

*) api - properly classify API sessions in log;
*) chr - enabled promiscuous mode (requires to be enabled on host as well) when running CHR on Hyper-V;
*) kidcontrol - added dynamic accept firewall rules to allow bandwidth limit when FastTrack is enabled;
*) led - fixed LED default configuration for LtAP mini;
*) snmp - added "rssi" and "tx-sector-info" value support for w60g type interfaces;
*) snmp - added station "distance", "phy-rate", "rssi" value support for w60g type interfaces;
*) ssh - allow to use "diffie-hellman-group1-sha1" on TILE and x86 devices with "strong-crypto" disabled;
*) w60g - added 4th 802.11ad channel (CLI only);
*) w60g - added distance measurement;
*) w60g - general stability and performance improvements;
*) w60g - improved maximum achievable distance;
*) w60g - properly report center status under "tx-sector-info";
*) winbox - show "sector-writes" on ARM devices that have such counters;
*) winbox - show "System/Health" only on devices that have health monitoring;

To upgrade, click "Check for updates" at /system package in your RouterOS configuration interface, or head to our download page: http://www.mikrotik.com/download

If you experience version related issues, then please send supout file from your router to [email protected]. File must be generated while router is not working as suspected or after some problem has appeared on device

rcで修正が続いているAPI関連の修正が入っています。

また、W60Gについてはパフォーマンスの修正を含め、設定項目の追加などが行われているようです。

今のところ公式フォーラムへの書き込みは少なめですが、ARMを使用しているRouterboardでのNV2が機能しない件については、まだfixが行われていないようで、リクエストが上げ続けられています。

また、usermanを使用し、Paypal認証を行う際にSSLエラーが出る件、CCRではkernel panicとboot loopが発生する件が報告されています。