RouterOS 6.43.13[long-term]が公開されました。



*) bridge - count routed FastPath packets between bridge ports under FastPath bridge statistics;
*) bridge - fixed BOOTP packet forwarding when DHCP Snooping is enabled;
*) bridge - fixed packet forwarding with enabled DHCP Snooping and Option 82;
*) bridge - fixed possible memory leak when using "ingress-filtering=yes" on bridge interface;
*) bridge - fixed system's identity change when DHCP Snooping is enabled (introduced in v6.43);
*) capsman - always accept connections from loopback address;
*) certificate - force 3DES encryption for P12 certificate export;
*) dhcp - fixed dual stack queue addition;
*) dhcpv6-server - allow to add DHCPv6 server with pool that does not exist;
*) dhcpv6-server - fixed missing gateway for binding's network if RADIUS authentication was used;
*) ethernet - added "tx-rx-1024-max" counter to Ethernet stats;
*) ethernet - fixed packet forwarding when SFP interface is disabled on hEX S;
*) fetch - improved file downloading to slow memory;
*) gps - increase precision for dd format;
*) gps - removed unnecessary leading "0" for dd format;
*) ipsec - fixed all policies not getting installed after startup (introduced in v6.43.8);
*) ipsec - fixed stability issues after changing peer configuration (introduced in v6.43);
*) ipv6 - do not allow setting "preferred-lifetime" longer than "valid-lifetime";
*) kidcontrol - added "tur-fri", "tur-mon", "tur-sat", "tur-sun", "tur-thu", "tur-tue", "tur-wed" parameters;
*) kidcontrol - fixed validation checks for time intervals;
*) led - fixed default LED configuration for RBSXTsq-60ad;
*) lldp - fixed missing capabilities fields on some devices;
*) lte - do not show "session-uptime" if session is not up;
*) lte - improved SIM7600 initialization after reset;
*) netinstall - do not show kernel failure critical messages in the log after fresh install;
*) ntp-client - fixed "dst-active" and "gmt-offset" being updated after synchronization with server;
*) ppp - fixed dynamic route creation towards VPN server when "add-default-route" is used;
*) rb4011 - fixed ether10 failing to auto negotiate link speed to 1Gbps;
*) smb - added commenting option for SMB users (CLI only);
*) smb - fixed macOS clients not showing share contents;
*) smb - fixed Windows 10 clients not able to establish connection to share;
*) ssh - close active SSH connections before IPsec connections on shutdown;
*) supout - fixed "poe-out" output not showing all interfaces;
*) supout - fixed Profile output on single core devices;
*) winbox - added "conflict-detection" parameter in "IP/DHCP Server" menu;
*) winbox - added "coordinate-format" parameter in LTE interface settings;
*) winbox - added "use-local-address" parameter in "IP/Cloud" menu;
*) winbox - allow specifying interface lists in "CAPsMAN/Access List" menu;
*) winbox - fixed "IPv6/Firewall" "Connection limit" parameter not allowing complete IPv6 prefix lengths;
*) winbox - fixed "LCD" menu not shown on RB2011UiAS-2HnD;
*) winbox - moved "Too Long" statistics counter to Ethernet "Rx Stats" tab;
*) winbox - show "System/RouterBOARD/Mode Button" on devices that have such feature;
*) wireless - fixed antenna gain setting on RBSXT5nDr2;
*) wireless - improved antenna gain setting for devices with built in antennas;
*) wireless - improved AR5212 response to incoming ACK frames;
*) wireless - improved connection stability for new model Apple devices;


bridgeインターフェースについては、DHCP snoopingを有効にした際の動作の改善が入っています。


SMB機能については、Windows10やMac OSクライアントからの接続において、共有コンテンツが見えない問題が修正されています。


あとは無線LANについては、Mac OSクライアントからの接続の改善が図られています。これについては、以前からちょくちょく上がる問題なのですが、これで一部の方について接続がうまくいかなかった場合の改善が図られていると思います。問題がある場合は、Mikrotikサポートに連絡してみてください。

MikroTik Routers and Wireless – Software