RouterOS 6.42.2 [current] が公開になりました





RouterOS version 6.42.2 has been released in public "current" channel!

Before an upgrade:
1) Remember to make backup/export files before an upgrade and save them on another storage device;
2) Make sure the device will not lose power during upgrade process;
3) Device has enough free storage space for all RouterOS packages to be downloaded.

What's new in 6.42.2 (2018-May-17 09:20):

*) bridge - do not allow to add same interface list to bridge more than once;
*) bridge - fixed LLDP packet receiving;
*) bridge - fixed processing of fragmented packets when hardware offloading is enabled;
*) console - fixed type "on" and "wireless-status" LED trigger value setting (introduced in v6.42.1);
*) crs317 - fixed link flapping when inserted S+RJ10 module without any cable;
*) defconf - fixed wAP LTE kit default configuration;
*) dhcpv4 - prevent sending out ICMP port unreachable packets;
*) dhcpv4-client - fixed DHCP client stuck in renewing state;
*) dhcpv6-relay - fixed missing configuration after reboot;
*) filesystem - fixed NAND memory going into read-only mode;
*) hotspot - fixed user authentication when queue from old session is not removed yet;
*) interface - fixed "built-in=no" parameter for manually created interface lists;
*) interface - fixed "dynamic" built-in interface list behaviour;
*) interface - fixed interface list which include disabled member;
*) interface - fixed interface list which include/exclude another list;
*) interface - fixed interface configuration responsiveness;
*) ipsec - fixed policies becoming invalid if added after a disabled policy;
*) ipsec - improved reliability on IPsec hardware encryption for ARM devices except RB1100Dx4;
*) led - added "dark-mode" functionality for hAP ac and hAP ac^2 devices;
*) lte - improved LTE communication process on MMIPS platform devices;
*) quickset - fixed dual radio mode detection process;
*) routerboard - properly represent board name for hAP ac^2;
*) tile - fixed Ethernet interfaces becoming unresponsive;
*) winbox - allow to specify "any" as wireless "access-list" interface;
*) winbox - fixed "/ip dhcp-server network set dns-none" parameter;
*) wireless - enable all chains by default on devices without external antennas after configuration reset;
*) wireless - fixed packet processing when "static-algo-0=40bit-wep" is being used (introduced in v6.42);
*) wireless - fixed usage of allowed signal strength values received from RADIUS;
*) wireless - improved wireless throughput on hAP ac^2 and cAP ac;
*) x86 - fixed reboot caused by MAC Winbox connection;

To upgrade, click "Check for updates" at /system package in your RouterOS configuration interface, or head to our download page:

If you experience version related issues, then please send supout file from your router to File must be generated while router is not working as suspected or after some problem has appeared on device



相変わらずhAP ac^2の無線LANのパフォーマンスの修正が行われているようですが、このあたりはまだ公式フォーラムには、この件について触れている人がいないため、改善したか不明です。


currentブランチではありますが、適用に当たってはテストを行うようにしてください。筆者環境では3台のRouterboard(いずれもmipsbe製品です)に適用しましたが、boot loopや他に問題があるような状況は確認できていません。

ダウンロードはSystem > Packages  > “Check For Updates” やダウンロードページからイメージをダウンロードするようにしてください。

MikroTik Routers and Wireless – Software

v6.42.2 [current] – MikroTik